TSA-203ES-W
| Total load resistance | Shelf load capacity
(Included shelf weight) |
Floor load | Inside dimension (W x H x D) |
Ramp Rate | Range |
|---|---|---|---|---|---|
| 50 | 17 | - | 650 x 460 x 670 mm | Std within 5 min | Temperature : -70°C to +200°C |
TSA series (Fixed test area type - Damper type, two/three zones)
Conform to global testing standards such as IEC 60068-2-14 Na and MIL-STD-883K.
Test area capacity: 40L to 300L
Thermal shock without moving test specimens
TSA series is designed to evaluate reliability of test specimens by rapid change of the air temperatures from hot to cold repeatedly by opening and closing of damper in a single test area. You can get accurate test results without any mechanical impact on test specimens because a test area does not move. Fixed test area type can save testing time because transfer time of the specimen from one chamber to the other is not necessary, also suitable for testing large size, heavy specimens and/or testing many small devices at one time.
Highly accurate temperature recovery
The conditioned air is pre-cooled or pre-heated beyond the setpoint, allowing quicker recovery of the desired condition.
Easy access to specimens
Wiring to specimens is simple and easy, also the cables are supported and secured in its position because the test area does not move. Monitoring and data acquisition of test specimens is easy through cable port, too.
TSA How it works (1min 26sec)